Nowadays, the use of Ready mixed concrete is increasing, so the RMC batching plant is also increasing. However, some customers have no idea how to adjust the concrete mix ratio when using the ready mixed concrete mixing plant to produce concrete.

If the bleeding happened in the fresh concrete of the ready mix concrete batching plant, you should find the cause in time. If it is not the adaptability problem of the additives or the cementing material, adjust the blending ratio of the coarse aggregate and adjust the gradation to the best . Do not apply a fixed blending ratio.

When the on-site slump exceeds the limit of the set slump, it is necessary to analysis the cause in time, re-measure the moisture content of the gravel material, and correct the mix ratio. If the water content is measured and the calculation is correct, the amount of the water reducing agent may be increased or decreased by 0.05 to 0.1% for adjustment.

When the sand rate of the concrete produced by the RMC batching plant is too large or too small, the cause should be identified in time, and the sand rate should be properly adjusted, and the adjustment ratio is ±1%.

If the above method does not solve the problem of concrete produced by Ready mix concrete mixing plant, the production should be stopped immediately, and professional maintenance personnel should be sought for maintenance, and effective measures should be taken in time to avoid other quality problems.

The above is some of the problems we have introduced for you about the concrete mix ratio of Ready mix concrete batching plant.  SUNTSING CONSTRUCTION MACHINERY is a professional manufacturer of customized concrete batching plant,  we are fabricating and supplying all kinds of concrete mixing plant and relative spare parts, we are warmly welcome customized concrete batching plant.